Full List of Published Journal Articles (36)
Year – 2024
[36] Majmader, F. B., & Hasan, M. J. (2025). Heat transfer and fluid flow characteristics of a periodically constricted microchannel heat sink with supercritical carbon-di-oxide (sCO2) as a coolant near its critical point. International Journal of Thermal Sciences, 210, 109609. https://doi.org/10.1016/j.ijthermalsci.2024.109609
[35] Hasan, M. M., Hasan, M. J., & Rahman, P. B. (2024). Comparison of RNN-LSTM, TFDF and stacking model approach for weather forecasting in Bangladesh using historical data from 1963 to 2022. PLOS ONE, 19(9), e0310446. https://doi.org/10.1371/journal.pone.0310446
[34] Waqas, H., Hasan, M. J., Ji, C., Liu, D., Kang, C., & Muhammad, T. (2024). Melting performance of PCM with MoS2 and Fe3O4 nanoparticles using leaf-based fins with different orientations in a shell and tube-based TES system. International Communications in Heat and Mass Transfer, 158, 107944. https://doi.org/10.1016/j.icheatmasstransfer.2024.107944
[33] Balamurugan, V., P., S. M., Hasan, M. J., & Sudharsan, N. M. (2024). A semi-empirical relation based on temperature difference and filling ratio in a closed loop pulsating heat pipe: A numerical study. PLOS ONE, 19(11), e0309108. https://doi.org/10.1371/journal.pone.0309108
[32] Waqas, H., Hasan, M. J., Jaima, S. J., Naqvi, S. M. R. S., Manzoor, U., Liu, D., Muhammad, T. (2024). Numerical study of third-grade nanofluid flow with motile microorganisms under the mixed convection regime over a stretching cylinder. ZAMM – Journal of Applied Mathematics and Mechanics. https://doi.org/10.1002/zamm.202400024
[31] Huda, M. N., Hasan, M. J., Bairagi, T., Azad, A. K., & Rahman, M. M. (2024). Artificial Neural Network analysis on the effect of mixed convection in a triangular-shaped geometry using water-based Al2O3 nanofluid. PLOS ONE, https://doi.org/10.1371/journal.pone.0304826
[30] Fahad, M. K., Hasan, M. J., Ifraj, N. F., & Dey, D. C. (2024). Numerical investigation on the impact of different design arrangements of helical heat exchangers with varying cross-sections utilizing ternary hybrid nanofluids. Heliyon, vol. 10, no. 14, p. e34481. https://doi.org/10.1016/j.heliyon.2024.e34481
[29] Shaheen, A., Hasan, M. J., Imran, M., Waqas, H., & Muhammad, T. (2024). Hydrothermal properties with entropy generation effects on a hybrid nanofluid considering thermal radiation on a stretching/shrinking sheet. Numerical Heat Transfer, Part A: Applications. https://doi.org/10.1016/j.est.2024.112048
[28] Majmader, F. B., & Hasan, M. J. (2024). Effects of bidirectional rib arrangements on turbulent flow structure and heat transfer characteristics of a two-pass channel for turbine blade internal cooling. International Communications in Heat and Mass Transfer, 156, 107688. https://doi.org/10.1016/j.icheatmasstransfer.2024.107688
[27] Fahad, M. K., Subah, S., Ifraj, N. F., Tahsin, S. H., Alvi, T. R., & Hasan, M. J. (2024). Comparative analysis on melting performance of PCM using rectangular and branching fin configurations in a shell and tube type thermal energy storing unit. Journal of Energy Storage, 91, 112048. https://doi.org/10.1016/j.est.2024.112048
[26] Majmader, F. B., & Hasan, M. J. (2024). Multi-objective hydrothermal performance optimization of a microchannel heat sink equipped with delta winglet vortex generators using NSGA-II genetic algorithm. International Journal of Thermal Sciences, 201, 109046. https://doi.org/10.1016/j.ijthermalsci.2024.109046
[25] Bairagi, T., Hasan, M. J., Huda, M. N., Azad, A. K., & Rahman, M. M. (2024). Artificial neural network (ANN) analysis on thermophysical properties of magnetohydrodynamics flow with radiation in an arc-shaped enclosure with a rotating cylinder. Heliyon. https://doi.org/10.1016/j.heliyon.2024.e28609
[24] Ul Abrar, M. S., Nadim Ezaz, K. F., Hasan, M. J., Pranto, R. I., Alvy, T. A., & Hossain, M. Z. (2024). Speed-dependent impact analysis on a car bumper structure using various materials. Results in Engineering, 21, 101927. https://doi.org/10.1016/j.rineng.2024.101927
[23] Akter, F., Hoque, M. A., Ekram, K. A., Saha, B., & Hasan, M. J. (2024). Design of a novel aerofoil of a light aircraft for robust aerodynamic performance at high Reynolds number regime using XFLR5. Arabian Journal for Science and Engineering. https://doi.org/10.1007/s13369-024-08837-6
[22] Waqas, H., Hasan, M. J., Naqvi, S. M. R. S., Liu, D., Muhammad, T., Eldin, S. M., & Kang, C. (2024). Enhancing the performance of thermal energy storage by adding nano-particles with paraffin phase change materials. Nanotechnology Reviews. https://doi.org/10.1515/ntrev-2023-0180
Year – 2023
[21] Hasan, M. J., Azad, A., Hossain, R., Rahman, M., & Karim, M. (2023). Analysis of mixed convection under radiation and magnetohydrodynamics utilizing Kerosene-CNT nanofluid in a lid-driven cavity. International Journal of Thermofluids, 100528. https://doi.org/10.1016/j.ijft.2023.100528
[20] Azad, A., Hasan, M. J., Karim, M., Morshed Alam, E. M., & Rahman, M. (2023). Rotational effect of a cylinder on hydro-thermal characteristics in a partially heated square enclosure using CNT-water nanofluid. Heliyon, e22744. https://doi.org/10.1016/j.heliyon.2023.e22744
[19] Majmader, F. B., & Hasan, M. J. (2023). Thermal enhancement and entropy generation of an air-cooled 3D radiator with modified fin geometry and perforation: A numerical study. Case Studies in Thermal Engineering, 103671. https://doi.org/10.1016/j.csite.2023.103671
[18] Fahad, M. K., Ifraj, N. F., Tahsin, S. H., & Hasan, M. J. (2023). Numerical investigation of the hydrothermal performance of novel vortex generators in a rectangular channel by employing inclination and rotational angles. International Journal of Thermofluids, 20, 100500. https://doi.org/10.1016/j.ijft.2023.100500
[17] Waqas, H., Jahid Hasan, M., Majeed, A. H., Liu, D., & Muhammad, T. (2023). Hydrothermal characteristics, entropy and kinetic energy investigation in a sinusoidal cavity for variable wavelengths and solid volume fraction using Cu-water nanofluid. Journal of Molecular Liquids, 389, 122911. https://doi.org/10.1016/j.molliq.2023.122911
[16] Hasan, M. J., & Bhuiyan, A. A. (2023). Thermo-hydrodynamic characteristics and entropy generation in a tube heat exchanger using multiple head ribbed geometries. South African Journal of Chemical Engineering, 45, 305-314. https://doi.org/10.1016/j.sajce.2023.06.009
[15] Nuhash, M. M., Alam, M. I., Zihad, A., Hasan, M. J., Duan, F., Bhuiyan, A. A., & Karim, M. R. (2023). Enhancing energy harvesting performance of a flat plate solar collector through integrated carbon-based and metal-based nanofluids. Results in Engineering,19, 101276. https://doi.org/10.1016/j.rineng.2023.101276
[14] Hossain, F., Hasan, M. J., Sarkar, M.Z., Karim, M.R., & Bhuiyan, A. A. (2023). Prediction of Carbon capture and sequestration (CCS) technology in a 125 MW tangentially coal-fired subcritical thermal power plant for retrofitting in Bangladesh. Results in Engineering, June 2023, 101159. https://doi.org/10.1016/j.rineng.2023.101159
[13] Azad, A.K., Abid, Abyaz, Mithun, C.N.,Hasan, M.J., Hossain, R., & Rahman, M. (2023). Effect of Richardson Number on Transient Double Diffusive Mixed Convection: A Thermo-Hydrodynamic Study. International Journal of Thermofluids, 100273. https://doi.org/10.1016/j.ijft.2022.100273
Year – 2022
[12] Mithun, C.N., Hasan, M.J., Azad, A.K., Hossain, R., & Rahman, M. (2022). Double-Diffusive Unsteady Flow in a Roof-Based Air Ventilation System with Variable Prandtl Number. Arabian Journal for Science and Engineering, 1-16. https://doi.org/10.1007/s13369-022-07453-6
[11] Hasan, M. J., & Bhuiyan, A. A. (2022). Investigation of thermal performance and entropy generation in a helical heat exchanger with multiple rib profiles using Al2O3-water nanofluid. Case Studies in Thermal Engineering, 102514. https://doi.org/10.1016/j.csite.2022.102514
[10] Mithun, C., Hasan, M. J., Azad, A., Hossain, R., & Rahman, M. (2022). Effect of unsteady relative thermal and concentration boundary layer thickness on mixed convection in a partially heated contaminated enclosure. South African Journal of Chemical Engineering, 42, 201-215. https://doi.org/10.1016/j.sajce.2022.08.010
[09] Nasim, M., Hasan, M. J., & Galvanetto, U. (2022). Impact behavior of energy absorbing helmet liners with PA12 lattice structures: A computational study. International Journal of Mechanical Sciences, 233, 107673. https://doi.org/10.1016/j.ijmecsci.2022.107673
[08] Azad, A., Islam, N. M. M., Mithun, C., Rifa, T. I., Hasan, M. J., Hossain, R., & Rahman, M. (2022). Numerical study on heat and mass transfer characteristics in a confined enclosure with variable buoyancy ratio. Results in Engineering, 15, 100569. https://doi.org/10.1016/j.rineng.2022.100569
[07] Hasan, M. J., Azad, A., Islam, Z., Hossain, R., & Rahman, M. (2022). Periodic Unsteady Natural Convection on CNT Nano-powder Liquid in a Triangular Shaped Mechanical Chamber. International Journal of Thermofluids, 15, 100181. https://doi.org/10.1016/j.ijft.2022.100181
[06] Hossain, R., Hasan, M. J., Azad, A., & Rahman, M. (2022). Numerical study of low Reynolds number effect on MHD mixed convection using CNT-oil nanofluid with radiation. Results in Engineering, 14, 100446. https://doi.org/10.1016/j.rineng.2022.100446
[05] Hasan, M. J., Ahmed, S. F., & Bhuiyan, A. A. (2022). Geometrical and coil revolution effects on the performance enhancement of a helical heat exchanger using nanofluids. Case Studies in Thermal Engineering, 35, 102106. https://doi.org/10.1016/j.csite.2022.102106
[04] Islam, Z., Azad, A., Hasan, M. J., Hossain, R., & Rahman, M. (2022). Unsteady periodic natural convection in a triangular enclosure heated sinusoidally from the bottom using CNT-water nanofluid. Results in Engineering, 14, 100376. https://doi.org/10.1016/j.rineng.2022.100376
[03] Hossain, R., Azad, A., Hasan, M. J., & Rahman, M. (2022). Radiation effect on unsteady MHD mixed convection of kerosene oil-based CNT nanofluid using finite element analysis. Alexandria Engineering Journal, 61(11), 8525-8543. https://doi.org/10.1016/j.aej.2022.02.005
[02] Hossain, R., Azad, A., Hasan, M. J., & Rahman, M. (2022). Thermophysical properties of Kerosene oil-based CNT nanofluid on unsteady mixed convection with MHD and radiative heat flux. Engineering Science and Technology, an International Journal, 35, 101095. https://doi.org/10.1016/j.jestch.2022.101095
[01] Hasan, M. J., Tawkir, K., & Bhuiyan, A. A. (2022). Improvement of an exhaust gas recirculation cooler using discrete ribbed and perforated louvered strip vortex generator. International Journal of Thermofluids, 13, 100132. https://doi.org/10.1016/j.ijft.2022.100132
Full List of Conference Papers/Proceedings (02)
Year – 2023
[02] Mostafa Kamal Fahad, Nowroze Farhan Ifraj, Salim Subah, Md Araful Hoque, Abu Kabid Md Wakil Wahid Nirjon, Md. Jahid Hasan. CFD Analysis of Helical Tube Heat Exchanger with Different Curvature Ratios and Geometric Profile using MWCNT-Water Nanofluid. 1st IUT International Conference on Mechanical, Materials and Production Engineering (IUT-ICMMPE) 2023; 21-22 July 2023; Gazipur, Dhaka, Bangladesh, Conference Link: https://mpe.iutoic-dhaka.edu/icmmpe-2023-1/home-page
Year – 2022
[01] Mahmudul Firoz, Md. Jahid Hasan, Md. Rezwanul Karim and Arafat A. Bhuiyan. Introduction of Eco Scrubbing Technology for Controlling Emissions. International Conference on Environmental Protection for Sustainable Development (ICEPSD-2022) September 2-4, 2022, Organized by Forest and Environment Affairs Sub-Committee, Bangladesh Awami League, Conference Link: https://icepsd2022.org/
Submitted/Under-review in Journals (25)
[25] [Submitted] Bhuiyan, S. A., Hasan, M. J., Hoque, M. A. (2024) Enhancing Hydrodynamic Efficiency in Autonomous Underwater Vehicles (AUVs) utilizing Adjoint Method and Proper Orthogonal Decomposition.
[24] [Submitted] Fahad, M. K., Subah, S., Ifraj, N. F., Tahsin, S. H., Alvi, T. R., Hasan, M. J., Rahman, F. (2024). Impact of Employing Rectangular and Branching Fins on the Solidification of n-Eicosane Phase Change Material in a Shell and Tube Heat Exchanger for TES.
[23] [Revision Submitted] Waqas, H., Hasan, M. J., Fida, M., Liu, D., Muhammad, T. (2024). Numerical Study of Bioconvective Nanofluid Flow Over an Infinite Horizontal Plate: Thermal Radiation and Microorganism Interactions.
[22] [Submitted] Hoque, M. A., Akter, F., Tahsin, S. H., Hasan, M. J., Uddin, S. M. N., & Siddique, I. J. (2024). RANS Turbulence Model Performance in Aerodynamic Simulations of the Ahmed Body: A CFD Study.
[21] [Under Review] Shejan, M. E., Noor, S., Amin, S., Hasan, M. J., Firoz, M., Karim, M. R., & Bhuiyan, A. A. (2024). Effects of Swirl-Dominated Flow Using Therminol-55 Fluid on Heat Transfer Performance in Multi Head Ribbed Tubes.
[20] [Submitted] Hasan, M. M., Rahman, P. B., & Hasan, M. J. (2024). An evaluation of TFDF and Stacking Model approach for weather prediction in Bangladesh based on historical data.
[19] [Submitted] Bairagi, T., Hasan, M. J., Huda, M. N., Azad, A. K., & Rahman, M. M. (2024). The influence of the radiation parameter on the thermal behavior of an arc-shaped cavity with a cylinder positioned in the center utilizing alumina water nanofluid.
[18] [Revision Submitted] Waqas, H., Hasan, M. J., Liu, D., & Muhammad, T. (2024). Numerical study of melting and heat transfer performance of thermal energy storage system using nano-PCM in the triplex tube heat exchanger with leaf-vein-shaped fins.
[17] [Submitted] Bairagi, T., Hasan, M. J, Huda, M. N., Azad, A. K., & Rahman, M. M. (2024). Artificial Neural Network (ANN) based prediction of nanofluid concentration for unsteady MHD mixed convection and radiation with a rotating cylinder.
[16] [Revision Submitted] Hasan, M. M., Ahamed, R., & Hasan, M. J. (2023). Multi-objective optimization of the aerodynamic efficiency of NACA 0012 airfoil for high Reynolds number using CFD and ANN-based genetic algorithm.
[15] [Submitted] Waqas, H., Hasan, M. J., Zainab, S., Liu, D., & Manzoor, M. (2023). Melting performance of pure salt and Ceramic Phase Change Material with Cu and TiO2 nanoparticles using Longitudinal, Y and Fork-shaped fins in Thermal Energy Storage.
[14] [Submitted] Waqas, H., Hasan, M. J., Khan, S. A., Liu, D., & Muhammad, T. (2023). Numerical analysis of convective flow of micropolar nanofluid with microorganisms through an inclined stretchable cylinder.
[13] [Submitted] Waqas, H., Hasan, M. J., Khan, S. A., Liu, D., & Muhammad, T. (2023). Statistical-based optimization and numerical analysis of dusty Oldroyd-B nanofluids two-phase flow for thermal heat storage applications.
[12] [Submitted] Waqas, H., Hasan, M. J., Manzoor, U., Liu, D., Muzamil Fida, M., & Muhammad, T. (2023). Numerical analysis of hydrothermal fluctuations in radiative nanofluid flow in a rotating disk with gold nanoparticles in Ethylene Glycol.
[11] [Submitted] Waqas, H., Hasan, M. J., Hussain, M., Liu, D., & Muhammad, T. (2023). Various shape factor effects of Au/Blood TiO2/Blood nanofluids over a radially extended rotating disk under Cattaneo-Christov heat flux, radiation and magnetic field.
[10] [Submitted] Waqas, H., Hasan, M. J., Khan, S. A., Liu, D., & Muhammad, T. (2023). Numerical investigation of heat transfer and entropy generation under thermal radiation in unsteady Maxwell nanofluid flow with slip boundary condition over a stretching surface.
[09] [Submitted] Waqas, H., Hasan, M. J., Khan, S. A., Liu, D., & Muhammad, T. (2023). Thermal radiation, velocity slip and Casson parameter impact on the thermal performance and entropy generation in SiC-water and TiO2-water nanofluid flow in a stretchable surface.
[08] [Submitted] Waqas, H., Hasan, M. J., Liu, D., & Muhammad, T. (2023). Heat and Mass Transfer Characteristics and Entropy Generation in a Staggered Enclosure under Magnetic Field with Inclination Using Casson Fluid.
[07] [Submitted] Waqas, H., Hasan, M. J., Ahmad, S., Liu, D., & Muhammad, T. (2023). Investigation of Nusselt number variation of circular concentric tubes under MHD mixed convection using Copper-Iron Oxides/water hybrid nanofluid.
[06] [Revision Submitted] Waqas, H., Hasan, M. J., Liu, D., Majeed, A. H., & Muhammad, T. (2023). Impact of Hartmann Number and Aspect Ratio on the Heat and Mass Transfer Characteristics in a Hexagonal Enclosure with a Heated Circular Obstacle Inside.
[05] [Submitted] Hossain, F., Hasan, M. J., Sarkar, M.Z., Karim, M.R., & Bhuiyan, A. A. (2023). Effects of Temperature, CO2, and CCS Technology on Retrofitting a 125 MW Coal-Based Thermal Power Station of Bangladesh under Various Loadings.
[04] [Submitted] Chowdhury, T. S., Mita, M. N. H., Mohsin, F. T., Hasan, M. J., Karim, M. R., & Bhuiyan, A. A. (2022). Augmentation of Cooling in a Hybrid Photovoltaic Thermal (PVT) Module Utilizing Various Ribbed Surfaces.
[03] [Submitted] Hossain, F., Hasan, M. J., Firoz, M., Bhuiyan, A. A., & Karim, M. R. (2022). Recent Progress, Present Needs and Future Trends of Coal Combustion Technology for Sustainable Development of Bangladesh.
[02] [Submitted] Azad, A. K., Rifa, T. I., Mithun, C. N., Islam, N. M. M., Hasan, M. J., Hossain, R., & Rahman, M. M. (2022). Double Diffusive Mixed Convective Flow in a Room with an Air Channel with Variable Reynolds Number: A Numerical Study.
[01] [Revision Submitted] Azad, A. K., Hossain, R., Hasan, M. J., Shikder, M. J. H., & Rahman, M. M. (2022). Numerical Analysis of Unsteady Magnetic Effect on Oil-Based CNT Nanofluid in a Square Enclosure with Radiation.